Search results for: 'the mount event'

Hand colouring The idea of adding colour to a monochrome image by hand dates back to the beginning of photography. At this time it was the only way to get a colour photograph. Although colour photography using the three colour process was put forward just short of thirty years after the first photograph by Nicephore Niepce,  it was, in its early years, expensive and difficult to produce a colour image. Hand colouring became a practical way to give the impression of colour and everything from Daguerroty...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

Welcome to the ILFORD PHOTO online store. Where you place an order via our website, these terms and conditions will apply to that order in addition to the general website terms of use and privacy policy. You should therefore read these terms carefully before you place your order as they explain your and our legal rights and also contain important information about our contract with you and how your order will be dealt with. If you have any questions, please contact us before you place your order by cal...

Tranquility Alan Brock searches for a sense of calm in his images. He shares how he achieves it below Technical info Film Used: Delta 100 Format: 4x5 Camera: Intrepid 4x5 II Lens: Nikkor 180mm f/5.6. Shot at f/45 Exposure time: 40s Other equipment: Gitzo 1545T Tripod Location:  Parksville Lake Tennessee     Firstly, tell us the story behind this image. What inspired you to shoot it? I like to search for a sense of calm in my images.  In a lot of ways this fits my...

An experiment in chemical possibilities When I took up a camera after a few years’ hiatus in 1990, I was surprised to discover that I could no longer get a black & white film developed through the nearest camera shop, never mind through the local pharmacy.  If memory serves, I was told it would cost $40 for a single film. Naturally, I returned to processing my own film just I had done when I first took up a camera in the early 1970s. The world had moved on, and colour film was the default medium f...

Turning your negatives into positives Reversal processing enables black and white transparencies to be produced directly from high quality films such as PAN F Plus, FP4 Plus and DELTA 100 PROFESSIONAL How it works It starts with the development of the negative image. This leaves the unused silver halide untouched, but it is not fixed, as it will be used later to form the positive image. After the negative image has been developed, it is totally bleached away using an acid bleach. This leaves the remainin...

Below are some of the common errors that can occur when processing black and white films. Unfortunately some of these errors can result in the images being lost or partially ruined. By knowing what has caused the errors, you may hopefully prevent any repeat incidents. Film entirely blank - No visible images or edge signing A completely blank film with no images and no signing (i.e text in the perforation areas showing product and numbers) - indicates the film has received no development at all. Blank ...

We recently had the pleasure of turning the tables on one of the stalwarts of the film photography community when we asked Em if he'd be the first of our interviews in the 'Lockdown Sessions'.  We're so glad that he agreed. What made you set up Emulsive.org and what were your initial plans for it? My-first-roll...-Of-35mm-film-Fuji-Superia-X-TRA-400-by-EMULSIVE EMULSIVE started as an idea in early 2015. I thought I should put up a blog where I could post a few photos and blog about stuff that I'd lea...

When we held our first Lockdown Session with Emulsive, we asked him who he'd like to see us interview in future and he suggested the very lovely Aislinn. (AKA The Film Pusher). SECTION 1 - THE BEGINNING SHARE YOUR FAVOURITE IMAGE / PRINT SHOT ON ILFORD FILM AND TELL US WHAT IT MEANS TO YOU? I have tons! But let me share my recent favourite, the one that I had printed and hung on my wall. It’s a pinhole image of the Natural History Museum in London. It means a lot to me, as the NHM is a favourite visit ...